HUANGYAN JINMA PLASTIC MACHINE CO.,LTD

PRODUCTS LIST

QCS-10A-2

-- Information

-- Container

-- Overview

-- Specification

-- Solution

-- Operation

Complete Production Line:

According to different production requirement, there are different equipping solution and follow are four main solutions for production line:

. Solution One:

A. QCS-10A-2 Bottle Blower B. QCS-18 Preform Reheater C. STA155 (1.2/30) . . High-pressure Air Compressor D. 0.6/40 Air Tank E. C-001 Air Filter	F. JCD-10SG Air Dryer G. T-001 Air Filter H. A-001 Air Filter I. .H-001 Air Filter . J .Two-cavity Blow Mold (Installed inside QCS-10A-2)

Production Information for Solution One

Main Final Product Range	Bottle for Mineral water, Edible oil, Alcoholic drinks, CSD, Soda drinks, Cosmetics, Clean lotion, Detergent, medicine, etc.
Final Product Shape	Round, Square, Oval, Flat, Off center, Petaloid, etc.
Bottle Volume Range	50~2000ml
Bottle Neck Finish Range	18~38mm
Max Bottle Body Diameter	130mm
Suitable Blow Mold	Two-cavity mold
Production Capacity	550~720 Bottle/hour (according to different bottle volume)

Main Pneumatic Elements used on Solution One

Name of Pneumatic Elements	Quantity
. 63MM Seal-Stretch Combining Cylinder	2pcs
. 100MM Clamping-Mold Cylinder	1pc
. 63MM Driven Cylinder	1pc
. Action Electromagnetic Valve	4pcs
. High-Pressure Electromagnetic Valve	4pcs

. Solution Two:

A. QCS-10A-2 Bottle Blower B. QCS-20 Preform Reheater C. STA155 (1.2/30) . . High-pressure Air Compressor D. 0.6/40 Air Tank E. C-001 Air Filter	F. JCD-10SG Air Dryer G. T-001 Air Filter H. A-001 Air Filter I. .H-001 Air Filter . J .Two-cavity Blow Mold (Installed inside QCS-10A-2)

Production Information for Solution Two

Main Final Product Range	Bottle for Mineral water, Edible oil, Alcoholic drinks, CSD, Soda drinks, Cosmetics, Clean lotion, Detergent, medicine, etc. .
Final Product Shape	Round, Square, Oval, Flat, Off center, Petaloid, etc.
Bottle Volume Range	50~2000ml
Bottle Neck Finish Range	18~38mm
Max Bottle Body Diameter	130mm
Suitable Blow Mold	Two-cavity mold
Production Capacity	Up to 720 Bottle/hour (according to different bottle volume)

Main Pneumatic Elements used on Solution Two

Name of Pneumatic Elements	Quantity
. 63MM Seal-Stretch Combining Cylinder	2pcs
. 100MM Clamping-Mold Cylinder	1pc
. 63MM Driven Cylinder	1pc
. Action Electromagnetic Valve	4pcs
. High-Pressure Electromagnetic Valve	4pcs

. Solution Three:

A1&A2 QCS-10A-2 Bottle Blower B. QCS-18 Preform Reheater C. STA155 (1.2/30) . . High-pressure Air Compressor D. HTA100H (0.84/12) . . Low-pressure Air Compressor E. 0.6/40 Air Tank	F. C-001 Air Filter G. JCD-10SG Air Dryer H. T-001 Air Filter I. A-001 Air Filter J. .H-001 Air Filter . K1&K2. .Two-cavity Blow Mold (Installed inside QCS-10A-2)

Production Information for Solution Three

Main Final Product Range	Bottle for Mineral water, Edible oil, Alcoholic drinks, CSD, Soda drinks, Cosmetics, Clean lotion, Detergent, medicine, etc. .
Final Product Shape	Round, Square, Oval, Flat, Off center, Petaloid, etc.
Bottle Volume Range	50~2000ml
Bottle Neck Finish Range	18~38mm
Max Bottle Body Diameter	130mm
Suitable Blow Mold	Two-cavity mold
Production Capacity	800~1100 Bottle/hour (according to different bottle volume)

Main Pneumatic Elements used on Solution Three

Name of Pneumatic Elements	Quantity
. 63MM Seal-Stretch Combining Cylinder	4pcs
. 100MM Clamping-Mold Cylinder	2pcs
. 63MM Driven Cylinder	1pc
. Action Electromagnetic Valve	8pcs
. High-Pressure Electromagnetic Valve	8pcs

. Solution Four:

A1&A2 QCS-10A-2 Bottle Blower B. QCS-20 Preform Reheater C. STA155 (1.2/30) . . High-pressure Air Compressor D. HTA100H (0.84/12) . . Low-pressure Air Compressor E. 0.6/40 Air Tank	F. C-001 Air Filter G. JCD-10SG Air Dryer H. T-001 Air Filter I. A-001 Air Filter J. .H-001 Air Filter . K1&K2 .Two-cavity Blow Mold (Installed inside QCS-10A-2)

Production Information for Solution Four

Main Final Product Range	Bottle for Mineral water, Edible oil, Alcoholic drinks, CSD, Soda drinks, Cosmetics, Clean lotion, Detergent, medicine, etc. .
Final Product Shape	Round, Square, Oval, Flat, Off center, Petaloid, etc.
Bottle Volume Range	50~2000ml
Bottle Neck Finish Range	18~38mm
Max Bottle Body Diameter	130mm
Suitable Blow Mold	Two-cavity mold
Production Capacity	900~1400 Bottle/hour (according to different bottle volume)

Main Pneumatic Elements used on Solution Four

Name of Pneumatic Elements	Quantity
. 63MM Seal-Stretch Combining Cylinder	4pcs
. 100MM Clamping-Mold Cylinder	2pcs
. 63MM Driven Cylinder	1pc
. Action Electromagnetic Valve	8pcs
. High-Pressure Electromagnetic Valve	8pcs

Main Difference between Solution One and Solution Two & Solution Three and Solution Four:

1) Since QCS-20 have more powerful heating capacity than QCS-18, for the same preform, the heating cycle time will be different, too. So, to produce the same bottle with same mold, Solution Two & Four will has higher production capacity than Solution One & Three.

2) Since QCS-20 has more control point and each lamp’s horizontal position can be adjusted independently, the preform’s different areas will get more precise heating result respectively. So, for the bottle with special shape, like flat, oval, off center and petaloid, Solution Two & Four will get more ideal bottle blowing result than Solution One & Three.