¡¡
¡¡
¡¡
PRODUCTS LIST |
|
¡€ |
QCS-10A-2 |
|
|
|
|
|
|
¡¡
¡¡
|
|
|
|
QCS-10A-2 is a kind of manual Stretch-Blow Molding Machine and is very ideal to produce PET bottle from 0.05L to 2L with 2-cavity blow mold. The final products can be widely used on the packing fields for water, carbonated or Non-carbonated drink, juice, edibleoil, medicine, detergent, shampoo and so on.
Each set of QCS-10A-2 is made up of two parts: Bottle Blower and Infrared type Preform Reheater. Thereinto, the reheater is in charge of heating the PET preform to suitable soft condition for blowing; and the blower will finish the whole bottle blowing process, including sealing, stretching, blowing, exhausting and blow mold¡¯s moving, controlled by advanced PLC control system. For more details about machine¡¯s operation, please refer to Operation Step for QCS-10A-2.
|
- Suit to produce 0.05 ~ 2.0L PET container with two-cavity blow mold
- Pneumatic elements (Bosch & Lucifer) are extremely reliable
- Advanced PLC control system with a use-friendly "soft-touch" pad
- Time-control precision of PLC up to 0.01second
- Built-in memory of PLC holds up to 14 sets of bottle blowing data
- Using Infrared type preform reheater
- Independent Temperature Control for different heating lamp to get ideal preform heating result
- Maximum loading capacity of the reheating unit up to 58 preforms.
- Heating lamps are adjustable in directions to suit various preform.
- Simple operation and highly-trained is not required.
- Fast, low cost production changeovers.
- Simple installation & startup adjustment
- Waste rate of finished bottle is less than 0.3%.
|
According to machine¡¯s different performance, QCS-10A-2 series stretch-blow molding machine has four models available to suit to customer¡¯s different bottle production requirement:
|
Model: QCS-10A-2 |
Deploy Details |
One Set of QCS-10A-2 Bottle Blower + One set of QCS-18 Preform Reheater |
|
Bottle Volume |
0.05L~2L |
Production Capacity |
can produce 550~720 Bottle/hour according to different bottle volume |
|
Model: QCS-10A-2¢ñ |
Deploy Details |
One Set of QCS-10A-2 Bottle Blower + One set of QCS-20 Preform Reheater |
|
Bottle Volume |
0.05L~2L |
Production Capacity |
can produce 720 Bottle/hour according to different bottle volume |
|
Model: QCS-10A-22 |
Deploy Details |
Two Sets of QCS-10A-22 Bottle Blower + One set of QCS-18 Preform Reheater |
|
Bottle Volume |
0.05L~2L |
Production Capacity |
can produce 800~1100 Bottle/hour according to different bottle volume |
|
Model: QCS-10A-22¢ñ |
Deploy Details |
Two Sets of QCS-10A-22 Bottle Blower + One set of QCS-20 Preform Reheater |
|
Bottle Volume |
0.05L~2L |
Production Capacity |
can produce 900~1400 Bottle/hour according to different bottle volume |
|
For more deploying details about QCS-10A-2 series, please refer to Solution for QCS-10A-2.
|
In conclusion, low investment, easy operation, low maintenance, high quality control is the main sell points of QCS-10A-2. |
For more information, please kindly contact us.
| |
|
|
|